{"id":41058,"date":"2022-01-17T19:23:37","date_gmt":"2022-01-17T13:53:37","guid":{"rendered":"https:\/\/infinitylearn.com\/surge\/?p=41058"},"modified":"2025-05-28T16:21:28","modified_gmt":"2025-05-28T10:51:28","slug":"extra-questions-sources-of-energy-cbse-class-10-science","status":"publish","type":"post","link":"https:\/\/infinitylearn.com\/surge\/study-materials\/extra-questions\/sources-of-energy\/cbse-class-10-science\/","title":{"rendered":"Extra Questions \u2013 Sources of Energy \u2013 CBSE Class 10 Science"},"content":{"rendered":"

Question-1<\/span><\/strong><\/h2>\n

Explain why only a part of the solar energy that strikes the upper regions of atmosphere, reaches the surface of the earth.
\nSolution:
\nThe ultra-violet rays and the gamma rays present in the solar energy is absorbed by the atmosphere as it comes down towards the surface of the earth, hence we say that only a part of solar energy reaches the surface of the earth.<\/p>\n

Question-2<\/span><\/strong>
\nExposure to which component of solar-radiation could be a health hazard?
\nSolution:
\nUltra-violet rays and gamma rays are the components of solar radiation which could a health hazard.<\/p>\n

Question-3<\/span><\/strong>
\nWith the help of a diagram, explain the construction and working of a box type solar cooker.
\nSolution:
\nThe heat absorbing property of black surfaces and the green house effect are utilised in making solar cookers. There are various types of solar cooker out of which, the box type solar cooker is one. The box of the solar cooker is made from non-conducting materials like plastics or fiberglass, with its inner walls painted in black. The walls of the box are made thick with a lining of non-conducting material to prevent loss of heat. Usually, a plane mirror is hinged on the top of the box. The mirror is adjusted in such a manner that it reflects sunlight into the box. The main purpose of the mirror is to increase the effective area for the collection of solar energy. The box is covered with a glass sheet that facilitates retention of heat inside due to green house effect. The temperature inside this type of solar cookers can go from 100 \u00baC to 140 \u00baC when they are kept in the sun for two to three hours. This type of cookers can be used to prepare food items that require slow heating, for example, for boiling rice, vegetables or dal. The solar cookers are provided with small containers with their outer surfaces painted in black. Two or three items could be prepared simultaneously by using these containers.<\/p>\n

Question-4<\/span><\/strong>
\nMention any two differences between a box type and a concentrator type solar heater.
\nSolution:
\nBox-type solar heater:
\nIn this type of heater, a plane reflector is used which does not concentrate solar energy at a point.
\nIt produces comparatively low temperature.
\nConcentrator type solar heater:
\nIn this type of heater a concave reflector or a parabolic reflector is used which concentrates the solar energy in a small region called focus.
\nIt produces high temperature.<\/p>\n

Question-5<\/span><\/strong>
\nWhy is it not possible to make use of solar cells to meet all our energy needs? State atleast two reasons to support your answer.
\nSolution:
\n(i) The electricity generated by solar cells during the day is stored by using it to change storage batteries. These storage batteries give us direct current, but to operate the various devices, alternating current is required.
\n(ii) The usage of solar cells becomes expensive, since the direct current given by the storage batteries has to be changed into alternating current using suitable appliances.
\nQuestion-6<\/span><\/strong>
\nMention any four areas where solar cells are being used as a source of energy.
\nSolution:
\nSolar cells are used for street-lighting, for traffic signals, for operating water-pumps and for running radio and television sets in remote areas.
\nQuestion-7<\/span><\/strong>
\nWhy can wind energy farms be established only at specific locations? Give reasons to support your answer.
\nSolution:
\nWind energy farms can be established over a big area of land, where sufficient wind is blowing always, because electricity generated by a single wind turbine is quite small, so in order to generate a large amount of electricity, a large number of wind turbines are erected over a big area of land.<\/p>\n

Question-8<\/span><\/strong>
\nIt is difficult to use hydrogen as a source of energy, although its calorific value is quite high. Explain.
\nSolution:
\n(i) When hydrogen gas is lighted, it burns with an explosion which is very unsafe.
\n(ii) It is very expensive to produce hydrogen gas by the electrolysis of water because it requires a lot of electricity.
\n(iii) It is very difficult to store and transport hydrogen gas as it is explosively inflammable.
\nHence it is difficult to use hydrogen as a source of energy, though it has high calorific value.<\/p>\n

Question-9<\/span><\/strong>
\nState the forms in which energy stored in the oceans manifests itself. Which one of these is utilized in OTEC systems?
\nSolution:
\nThe energy from oceans is obtained in three forms:
\n(i) Tidal energy
\n(ii) Ocean waves energy and
\n(iii) Ocean thermal energy
\nOcean thermal energy is used in OTEC system.<\/p>\n

Question-10<\/span><\/strong>
\nWith the help of a diagram, explain the process of destructive distillation of wood.
\nSolution:<\/p>\n

Let us take two glass tubes. In one tube we put some small pieces of soft wood and in other tube, we put some water. These two tubes are then arranged as shown in the figure. When we heat the tube with a burner, we can find that a gas goes out through the open end of the delivery tube. If we a light a match stick near this gas, it starts burning showing that it is a combustible gas. This combustible gas obtained from wood is called wood gas and it is used as a fuel. In another tube we can find that there are drops of deep black liquid at the bottom of the tube, under water. This deep black liquid is called tar. The black residue left behind the other tube is called charcoal. When this tube is cooled we can remove the charcoal from it.<\/p>\n

Question-11<\/span><\/strong>
\nWhy is charcoal considered a better fuel than wood? What are the disadvantages of converting wood into charcoal?
\nSolution:
\nCharcoal is a better fuel than wood because of the following reasons:
\n(i) Charcoal has better calorific value than wood, i.e., charcoal produces more heat on burning than an equal mass of wood.
\n(ii) Charcoal does not produce smoke while burning whereas wood produces a lot of smoke on burning and pollutes the air.
\n(iii) Charcoal is a compact fuel which is easy to handle and convenient to use.
\nDisadvantages of converting wood into charcoal:
\nCutting down of trees in the forests has created the shortage of wood to prepare sufficient charcoal. As a result of this, charcoal has now become expensive fuel. Hence the use of charcoal as a fuel is discouraged so as to prevent deforestation and hence to conserve the ecosystem from the ill effects of deforestation.<\/p>\n

Question-12<\/span><\/strong>
\nDescribe the steps involved in obtaining biogas and explain what is meant by anaerobic decomposition.
\nSolution:
\nTwo types of biogas plants are being used in our country; they are
\n1. The fixed-dome type
\n2. The floating gas-holder type
\nthe main raw material used in these plants is animal dung (cow-dung, dung of horse, elephant, goat, etc). Plant wastes like vegetable skins, fruit pulp and human excreta may be added to the animal dung.
\nBiogas is produced by the anaerobic decomposition of animal wastes like animal dung in the presence of water. The decomposition which takes place in the absence of oxygen is called anaerobic decomposition. This decomposition is carried out by anaerobic micro-organisms called anaerobic bacteria in the presence of water but in the absence of oxygen. Animal dung and plant wastes contain a lot of carbon compounds like carbohydrates, proteins and fats. The anaerobic bacteria decomposes these carbon compounds to form methane gas, which is the main constituent of bio-gas. Some other gases like carbon dioxide, hydrogen and hydrogen sulphide are also formed.
\nQuestion-13<\/span><\/strong>
\nState the advantages of obtaining biogas from animal dung and bio-wastes.
\nSolution:
\n(i) The bio-gas obtained from animal dung and bio-wastes can be used as a smokeless fuel.
\n(ii) It gives us a clean fuel.
\n(iii) The spent dung can be used as a manure.
\nQuestion-14<\/span><\/strong>
\nWhy are fossils fuels classified as non-renewable sources of energy? What steps should be taken to conserve these sources?
\nSolution:
\nFossil fuels are non-renewable source of energy, because if they are exhausted, it cannot be regenerated in a short time. This is because of the fact that, the fossil fuels which we use today, took millions of years to be formed. The fossil fuels are being fast depleted. To overcome this depletion, we have to conserve energy. We can follow the following simple rules to conserve energy:
\n(i) Switch off lights and fans when not in use.
\n(ii) Use solar cookers, heaters, dryers wherever possible.
\n(iii) Use tube lights which consumes less energy instead of incandescent lamp wherever possible.
\n(vi) Use efficient home appliances and fuel efficient stove.
\nQuestion-15<\/span><\/strong>
\nThe heat produced on complete combustion of 10 g of a fuel could raise the temperature of 2 kg of water from 20\u00b0 C to 70\u00b0 C. Calculate the calorific value of the fuel, if the specific heat capacity of water was 4.2 J\/g \u00b0 C. Assume that the heat taken by the container is negligible.
\nSolution:
\nMass of water = 2kg = 2000g
\nSpecific heat of water = 4.2 J\/g \u00b0 C
\nRise in temperature, t = 70 \u00b0 C \u2013 20 \u00b0 C = 50\u00b0 C
\nWe know that heat produced Q = m \u00d7 s \u00d7 t
\n= 2000 \u00d7 4.2 \u00d7 50
\n= 420000 joules
\nThis heat of 420000 joules has been produced by burning 10 g of fuel.
\nLet us calculate the heat produced by burning 1 g of fuel, hence
\n10 g of fuel produce heat = 420000 joules
\nand 1 g of fuel produce heat = 420000 \/10 = 42000 joule.
\nThus, the calorific value of the fuel is 42000 joules per gram.
\nTo convert it into kilojoules per gram, we have to divide by 1000, hence
\nCalorific value of fuel = 42000\/1000 kJ\/g = 42 kJ\/g.
\nQuestion-16<\/span><\/strong>
\nHow much energy will 1 kg mass of wood yield on complete combustion if its calorific value were 15 kJ\/g?
\nSolution:
\nCalorific value of wood = 15 kJ\/g = 15000 J\/g
\nMass of wood = 1 kg = 1000 g
\nTherefore heat produced by 1 kg of wood = 15000 \u00d7 1000 = 15 \u00d7 105<\/sup> J.
\nQuestion-17<\/span><\/strong>
\nSuppose the average solar energy incident on the green canopy (leaves) of a tree is 108<\/sup> J per day. The calorific value of the wood obtained from the tree could convert 1% of incident solar energy as wood, how many days will it take to produce 10 kg of wood?
\nSolution:
\nCalorific value of wood = 15 KJ\/g
\nConversely the same energy (15KJ) is required to form 1g of wood.
\nEnergy required to form 10 Kg of wood = 10 \u00d7 1000 \u00d7 15 = 15 \u00d7 104 <\/sup>KJ of energy
\nThe average solar energy received per day = 108<\/sup>J day-1 <\/sup>
\nBut 1% of incident energy that is useful for the formation of wood = (108<\/sup>) \/ 100 = 106 <\/sup>J day-1 <\/sup>
\nNo of days required to form 10 kg of wood = (15 x 104<\/sup> x 103<\/sup>) \/ 106<\/sup> = 15 \u00d7 10 = 150 days.
\nQuestion-18<\/span><\/strong>
\nState the conditions essential for combustion to take place.
\nSolution:
\nThe conditions for combustion to take place are:
\n(i) Presence of a combustible substance.
\n(ii) Presence of a supporter of combustion like air or oxygen.
\n(iii) Presence of a combustible substance to its ignition temperature.
\nQuestion-19<\/span><\/strong>
\nExplain how knowledge of the conditions of combustion could help in fire fighting.
\nSolution:
\n(i) The combustible substance like furniture, clothes and books, etc., are removed first when fire starts in a room, so that the fire may not spread due to the presence of a large number of combustible substance.
\n(ii) When the burning clothes of a person are covered with a blanket, the supply of air is cut off and burning stops.
\n(iii) A wet cloth does not burn because water present in it keeps the temperature of the cloth below its ignition temperature.
\nQuestion-20<\/span><\/strong>
\nWhat constitutes a source of energy?
\nSolution:
\nA resource which can provide adequate amount of energy in a convenient form over a long period of time constitutes a source of energy.
\nQuestion-21<\/span><\/strong>
\nState the two forms in which energy is mainly utilized at our homes.
\nSolution:
\nElectrical energy is used for lighting bulbs, tubes and to run household appliances. Heat energy obtained by burning wood, coal, kerosene or cooking gas are used for cooking our food.
\nQuestion-22<\/span><\/strong>
\nExplain why fossils fuels are classified as non-renewable sources of energy.
\nSolution:
\nFossil fuels are present in limited amounts in the earth and they cannot be replaced quickly when exhausted. Hence they are called non-renewable sources.
\nQuestion-23<\/span><\/strong>
\nName any two renewable sources of energy.
\nSolution:
\n(i) Solar energy
\n(ii) Wind energy.
\nQuestion-24<\/span><\/strong>
\nWhy is the use of wood as a fuel not advised although forests can be replenished?
\nSolution:
\nWood produces a lot of smoke on burning and pollutes the air. Hence it is advised not to use it as a fuel.
\nQuestion-25<\/span><\/strong>
\nHow much solar energy will be received by 1m2<\/sup> area in one hour, if the solar constant were 1.4 kilowatt per square metre?
\nSolution:
\nOne hour = 60 \u00d7 60 = 3600 s
\nSolar constant = 1.4 kW\/m2<\/sup> = 1.4 kJ\/s\/m2<\/sup>
\ni.e., in 1s, 1m2<\/sup> area receives energy = 1.4 kJ
\nSo, in 1 hour, i.e., in 3600 s, 1 m2<\/sup> area receive energy = 1.4 \u00d7 3600 kJ = 5040 kJ.
\nQuestion-26<\/span><\/strong>
\nWhat is the range of the wavelength of electromagnetic waves that constitutes visible radiation?
\nSolution:
\nThe wavelength range for the visible radiation is 400 nm in violet to 700 nm in red.
\nQuestion-27<\/span><\/strong>
\nName the component of sunlight that mainly carries heat with it.
\nSolution:
\nInfrared rays carries the sensation of heat in sunlight.
\nQuestion-28<\/span><\/strong>
\nName any two components of solar radiation that are not visible to us.
\nSolution:
\nUltraviolet rays and infrared rays.
\nQuestion-29<\/span><\/strong>
\nName the type of radiation emitted by a hot electric iron?
\nSolution:
\nInfrared radiation.
\nQuestion-30<\/span><\/strong>
\nState any two activities from our daily life in which solar energy is utilized.
\nSolution:
\n(i) Solar energy is used for drying clothes.
\n(ii) Solar energy is used for the preservation of fruits, vegetables and fish, etc., by the process of sun-drying.
\nQuestion-31<\/span><\/strong>
\nWavelength of radiation incident on a surface is 850 nm. Will the surface become visible when exposed to this radiation?
\nSolution:
\nThe surface is not visible since the radiation incident is more than visible range, i.e., the incident radiation is an infrared radiation which is invisible.
\nQuestion-32<\/span><\/strong>
\nName any two materials that are used for making solar cells.
\nSolution:
\nSolar cells are made from semiconductor materials like silicon and gallium.
\nQuestion-33<\/span><\/strong>
\nWhat prevents us in making use of solar cell panels to meet all our domestic needs of electricity?
\nSolution:
\nThe electricity generated by solar cell panels during the day is stored by using it to charge storage batteries. These storage batteries give us direct current. But to operate the various devices, alternating current is required. So, the direct current given by storage batteries has to be changed into alternating current by using suitable appliances before it can be used to run various devices. This increases the cost of using solar panels as the source of electricity.
\nQuestion-34<\/span><\/strong>
\nExplain the principle behind the working of a windmill.
\nSolution:
\nWhen the blowing wind strikes across the blades of wind-mill, it exerts a force on them due to which the blades of the wind-mill start rotating. As long as the wind is blowing, the blades of wind-mill keep on rotating continuously. The rotational motion of the blades of the wind-mill can be used to drive a large number of machines like water-pumps, flour mills and electric generators.<\/p>\n

Question-35<\/span><\/strong>
\nWhat is the minimum wind velocity required for obtaining useful energy with a windmill?
\nSolution:
\nThe minimum wind velocity required for obtaining useful energy is 15 km\/h.
\nQuestion-36<\/span><\/strong>
\nExplain how the energy of flowing water is related to solar energy.
\nSolution:
\nThe energy of flowing water is an indirect source of solar energy. The heat of solar energy evaporates water from the oceans and the surface of earth. The water vapour thus formed rise high in the atmosphere, get cooled and fall back to the earth in the form of rain and snow. This rain water and the water formed by the melting of snow then flows rapidly in the rivers and provides us energy.
\nQuestion-37<\/span><\/strong>
\nMention any two advantages and disadvantages of producing hydroelectricity by building dams on rivers.
\nSolution:
\nAdvantages
\n(i) The use of water energy does not cause any pollution.
\n(ii) It is a cheap and renewable source of electricity, which will never get exhausted.
\nDisadvantages
\n(i) The construction of dams on rivers results in to a variety of ecological changes in the downstream area of the river.
\n(ii) The soil in the downstream area becomes poor in quality because of the lack of annual floods to deposit nutrient rich slit on the banks of the river.<\/p>\n

Question-38<\/span><\/strong>
\nName the process that converts solar energy into chemical energy in nature.
\nSolution:
\nPhotosynthesis.<\/p>\n

Question-39<\/span><\/strong>
\nMention any two situations where muscular energy of animals is utilized to do mechanical work.
\nSolution:
\n(i) To burn the dry bio-mass, like cattle dung, directly to produce heat.
\n(ii) To convert the bio-mass into more useful fuels and then use these fuels for heating purposes.<\/p>\n

Question-40<\/span><\/strong>
\nWhy is burning firewood in traditional chulhas considered disadvantageous?
\nSolution:
\n(i) Most of the heat produced by burning the fuels in traditional chulhas is lost to the surroundings, only 8% of the heat is utilized in cooking food, etc.
\n(ii) It produces lot of smoke due to the incomplete combustion of wood, etc.
\nQuestion-41<\/span><\/strong>
\nName the main constituent of biogas.
\nSolution:
\nMethane is the main constituent of biogas.
\nQuestion-42<\/span><\/strong>
\nGive two examples of fossil fuels.
\nSolution:
\nCoal and Petroleum.
\nQuestion-43<\/span><\/strong>
\nName any three varieties of coal found in nature.
\nSolution:
\nAnthracite, Bituminous and Lignite.
\nQuestion-44<\/span><\/strong>
\nHow is petroleum gas obtained? Name the gas that is its main constituent.
\nSolution:
\nPetroleum gas is obtained as a by-product in oil refineries from the fractional distillation of petroleum. It is also produced by the cracking of petrol. The main constituent of petroleum gas is butane.
\nQuestion-45<\/span><\/strong>
\nName any two components obtained by fractional distillation of petroleum that are not used as a fuel.
\nSolution:
\nAsphalt and lubricating oil.
\nQuestion-46<\/span><\/strong>
\nWrite the full name for LPG and CNG.
\nSolution:
\nLPG \u2013 Liquefied Petroleum Gas
\nCNG \u2013 Compressed Natural Gas.
\nQuestion-47<\/span><\/strong>
\nName three characteristics of a fuel that determines its quality.
\nSolution:
\nThe three characteristics of a fuel that determines its quality are:
\n(i) It should burn easily.
\n(ii) It should cause least pollution in air.
\n(iii) It should be easy to store and should not produce any hazards during transportation.
\nQuestion-48<\/span><\/strong>
\nThe heat produced by burning of cow dung cake of mass 210 g raised the temperature of 50 g of water by 2\u00b0 C. Assuming that all the heat was utilized for heating water whose specific heat capacity is 4.2 J\/g \u00b0 C, calculate the calorific value of the dung cake.
\nSolution:
\nMass of cow dung = 210 g
\nMass of water, m = 50 g
\nSpecific heat of water, s = 4.2 J\/g\/\u00b0 C
\nRise in temperature, t = 2 \u00b0 C
\nHeat produced Q = m \u00d7 s \u00d7 t = 50 \u00d7 4.2 \u00d7 2 = 420 Joules
\nCalorific value of cow dung = 420\/210 = 2 J\/g.<\/p>\n

Question-49<\/span><\/strong>
\nExplain why is it difficult to burn a wet piece of wood.
\nSolution:
\nIt is difficult to burn a wet piece of wood because water present in it keeps the temperature of wood below its ignition temperature.<\/p>\n

Question-50<\/span><\/strong>
\nPouring dry sand over fire helps to contain it. Explain why?
\nSolution:
\nWhen sand is poured over fire, the supply of air is cut off and the fire stops. When the supporter of combustion is cut off, then the combustion also stops. Hence we say that pouring dry sand over fire helps to contain it.<\/p>\n

Question-51<\/span><\/strong>
\nWhat is the ultimate source of almost all our sources of energy?
\nSolution:
\nThe energy that the earth receives from the sun, in the form of heat and light, is the ultimate source of almost all our source of energy.<\/p>\n

Question-52<\/span><\/strong>
\nDefine net energy or useful energy with an example.
\nSolution:
\nThe difference between the output energy and the input energy is usually referred to as the net energy or useful energy. For example, when we use fuel, say coal or wood or kerosene, we have to provide some initial heat to ignite it, which in this case, is the input. The difference between the heat given off by the burning fuel i.e. the output and the input, will be the useful energy in this case.<\/p>\n

Question-53<\/span><\/strong>
\nHow does technology help in the transformation of energy?
\nSolution:
\nTechnology provides the means to transform the energy of different sources into either a fuel or electricity<\/p>\n

Question-54<\/span><\/strong>
\nHow is bio gas produced?
\nSolution:
\nBio-gas is produced by the anaerobic degradation of bio-mass in the presence of water but in the absence of air.<\/p>\n

Question-55<\/span><\/strong>
\nWhy is sun called the ultimate source of fossil fuels?
\nSolution:
\nFossil fuels are formed by plants and animals in the course of millions of years. Fossil fuels are the energy rich compounds of carbon which were originally made by plants with the help of sun\u2019s energy (by photosynthesis) when they (plants) were alive millions of years ago.<\/p>\n

Question-56<\/span><\/strong>
\nWhy can a match-stick light a splinter of wood but not a log of wood?
\nSolution:
\nThe ignition temperature of a splinter of wood is much lower than that of a log of wood. Thus, a match-stick can produce sufficient heat to reach the ignition temperature of a splinter of wood and make it burn while a match-stick cannot produce sufficient heat to reach the ignition temperature of log of wood and thus cannot cause it burning.<\/p>\n

Question-57<\/span><\/strong>
\nWhat is combustion? Give the conditions necessary for combustion.
\nSolution:
\nThe process of burning of a substance in the presence of air (oxygen) to produce heat and light is known as combustion.
\nConditions required for combustion are:
\n(i) presence of a combustible substance.
\n(ii) presence of a supporter of combustion (oxygen).
\n(iii) heating the combustible substance to its ignition temperature.<\/p>\n

Question-58<\/span><\/strong>
\nGive the uses of Natural gas.
\nSolution:
\nNatural gas is used
\n(i) as a domestic and industrial fuel.
\n(ii) in thermal power plants to generate electricity.
\n(iii) as a fuel in vehicles like buses, cars, autos etc.
\n(iv) in the fertilizer industry as a source of hydrogen gas.
\n(v) in the tyre industry as a source of carbon<\/p>\n

Question-59<\/span><\/strong>
\nWood is a renewable source of energy, but the use of wood as a fuel is not a wise decision. Explain.
\nSolution:
\nWood is a renewable source of energy. It is obtained by cutting trees. A newly planted sapling usually takes more than 15 years to grow and mature into a tree. Therefore replenishment of cut down trees takes a very long time. Cutting down of trees causes the depletion of forests leading to an imbalance in nature. Due to unsuitable air and the above reasons, usage of wood as a source of energy is not a wise decision.<\/p>\n

Question-60<\/span><\/strong>
\nWhat is meant by solar heating device?
\nSolution:
\nA device, which utilises sun\u2019s energy, is called a solar heating device.
\nExample: Solar Cooker, Solar Heater, etc.<\/p>\n

Question-61<\/span><\/strong>
\nSolar energy can be harnessed directly as well as indirectly. Give two examples of each type.
\nSolution:
\n(i) Direct utilization of solar energy
\nThe direct utilization of solar energy can be done either by collecting it as heat or by converting it directly into electricity.
\nExamples: Solar cooker and solar water heater uses this type of utilization of solar energy.
\n(ii) Indirect utilization of solar energy
\nThe indirect utilization of solar energy can be done by converting it into chemical energy like the bio-mass of plants. The other indirect ways of utilizing the solar energy are: Harnessing the energy of the wind and utilization of energy of the sea-waves.<\/p>\n

Question-62<\/span><\/strong>
\nExplain why a solar cooker box is painted black from the inside?
\nSolution:
\nA black coloured surface absorbs much more heat when compared to a white coloured surface. Hence in the designing of solar heating devices, black painted surfaces are used so that they may absorb the maximum amount of heat from the sunlight or sunshine. In a box-type solar cooker, the inner walls and the bottom of the cooker are painted black to maximize absorption of heat and to minimize heat loss due to reflection. A metal sheet, which is painted black, can be considered as the simplest solar heating device because on keeping in sunshine, it absorbs a lot of sunrays and becomes quite hot. However, after becoming hot, a black surface itself starts radiating the absorbed heat. So, after some time its temperature starts decreasing and tends to become equal to the temperature of its surroundings.<\/p>\n

Question-63<\/span><\/strong>
\nExplain why the property of glass in trapping heat is called greenhouse effect?
\nSolution:
\nThe property of glass is made use of in constructing green-houses used for protecting green plants in very cold climate. A greenhouse is a house-like structure made entirely of glass. The plants to be protected from the cold weather are placed inside this glass house. The glass roof and glass walls of the green-house allow the heat and light of the sun to pass through them and go inside it. They do not allow the inside heat to go out. In this way, heat gets trapped in the glass house due to which it becomes quite warm inside.
\nQuestion-64<\/span><\/strong>
\nHow are solar cells made?
\nSolution:
\nSolar cells are made from semi-conductor materials like silicon and gallium. To make solar cells, the wafers of semiconductor materials containing impurities are arranged in such a way that when light falls on them, a potential difference is produced between the two regions of the semi-conductor wafers. This potential difference then produces electric current. The potential difference produced by a single solar cell of 4 square centimeter size is about 0.4 volt to 0.5 volt and generates a current of 60 milliamperes.
\nQuestion-65<\/span><\/strong>
\nWhat causes the wind to blow?
\nSolution:
\nSolar energy is responsible for the blowing of the wind. The sun rays fall on the whole earth. But the intensity of sunrays is much more stronger near the equator of the earth than in the polar regions. Due to more intense sun-heat, the air near the surface of the earth in equatorial regions becomes quite hot. This hot air, being lighter, rises upwards. The cooler air from the polar regions of the earth starts flowing towards the equatorial regions of the earth to fill the space vacated by the hot rising air. In this way, air flows from the higher pressure regions to the low pressure regions of the earth. This flow of air from one place to another constitutes wind.
\nQuestion-66<\/span><\/strong>
\nExplain the transformation of energy taking place in the generation of hydroelectricity.
\nSolution:
\nThe water stored in a high dam has potential energy in it. When the dam water is allowed to fall down, the potential energy of stored water is converted into the kinetic energy of flowing water. When this fast moving water falls on the water turbine, its kinetic energy is transferred to the water turbine. By gaining the kinetic energy, the water turbine starts rotating rapidly and also rotates the armature of the generator fixed on its shaft. The armature then converts the kinetic energy into electrical energy.
\nQuestion-67<\/span><\/strong>
\nExplain how tidal energy can be used for generating electricity.
\nSolution:
\nThe rise of ocean water due to the attraction of the moon is called \u2018high tide\u2019 whereas the fall of ocean water is called \u2018low tide\u2019. The tidal water in the oceans builds up and recedes twice a day. The enormous movement of water between the high tides and low tides provides a very large source of energy in the coastal areas of the world. The tidal energy can be harnessed by constructing a tidal barrage or tidal dam. During high tide,when the level of water in the sea is high, sea-water flows into the reservoir of the barrage and turns the turbines. The turbines then turn the generators to produce electricity. During the low tide, when the level of seawater is low, the seawater stored in the barrage reservoir is allowed to flow out into the sea. This flowing water also turns the turbines and generates electricity. Thus, as seawater flows in and out of the tidal barrage during high and low tides, it turns the turbines to generate electricity.
\nQuestion-68<\/span><\/strong>
\nState two advantages and two disadvantages of geothermal energy.
\nSolution:
\nAdvantages
\n(i) It is economical to use because the cost of electricity produced by using geothermal energy is almost half of that produced from conventional energy sources.
\n(ii) It does not cause any pollution.
\nDisadvantages
\n(i) It is not available everywhere, it is available only in those areas where there are hot rocks near the earth\u2019s surface.
\n(ii) Deep drilling in the earth to obtain geothermal energy is technically very difficult and expensive.<\/p>\n

Question-69<\/span><\/strong>
\nWhy is it not good to burn animal dung directly as a fuel?
\nSolution:
\nIt is not good to burn animal dung directly as a fuel because
\n(i) Animal dung contains important elements like nitrogen and phosphorus which are required by the soil to support crops. So, burning of dung in the form of dung cakes, destroys the useful nutrients which can otherwise be use as a manure in agriculture.
\n(ii) They produce a lot of smoke on burning which causes air pollution.
\n(iii) They do not burn completely, they produce a lot of ash as residue.
\n(iv) They have a low calorific value.<\/p>\n

Question-70<\/span><\/strong>
\nName the substance from which alcohol is manufactured on a large scale. What is this process known as?
\nSolution:
\nAlcohol is made from sugar. It is manufactured in large quantities by fermentation of sugar.
\nQuestion-71<\/span><\/strong>
\nWhat are the drawbacks of wind energy?
\nSolution:
\nThe power which is generated using wind energy is not much efficient and also we cant get the power generation all the times.
\nQuestion-72<\/span><\/strong>
\nHow is tidal energy harnessed?
\nSolution:
\nHigh tides of sea, which can be used to generate power by using the turbine. A turbine converts mechanical energy into electrical energy.
\nQuestion-73<\/span><\/strong><\/p>\n

Why is charcoal a better fuel than wood?
\nSolution:
\nCharcoal is a better fuel than wood, because it has high thermal capacity than wood.
\nQuestion-74
\nHow is biogas prepared?
\nSolution:
\nWhen wood is compressed for a number of years inside the earth, it becomes charcoal. By using the charcoal, we can produce the biogas. Methane is the known biogas.
\nQuestion-75
\nExplain the function of turbine.
\nSolution:
\nTurbine is one which converts the mechanical energy into electrical energy. Hydroelectric power is generated using turbines which converts air pressure into electrical energy using rotation of turbines and also flow of water through turbines converts mechanical energy into electrical energy.<\/span><\/strong><\/p>\n

Question-76<\/span><\/strong>
\nGive some examples for renewable and non-renewable sources?
\nSolution:
\nSolar energy, wind energy are the examples of renewable sources. Coal, petroleum, fuel are the examples of non-renewable sources.<\/p>\n

Question-77<\/span><\/strong>
\nWhich is the known biogas?
\nSolution:
\nMethane is the known biogas.<\/p>\n

Question-78<\/span><\/strong>
\nHeat produced on burning 5gm of a fuel raises the temperature of 1 kg of H2<\/sub>O from 20o<\/sup>C \u2013 60o<\/sup>C. If the specific heat of H2<\/sub>O is 4.2J\/go<\/sup>C, calculate the calorific value of the fuel?
\nSolution:
\nFormula: mst = 5 gm x 4.2 x 40 = 840.<\/p>\n

Question-79<\/span><\/strong>
\nExplain greenhouse effect.
\nSolution:
\nThe phenomenon whereby the earth\u2019s atmosphere traps solar radiation, caused by the presence in the atmosphere of gases such as carbon dioxide, water vapor, and methane that allow incoming sunlight to pass through but absorb heat radiated back from the earth\u2019s surface.
\nQuestion-80<\/span><\/strong>
\nWhy does the interior of a car parked in the sun become hot?
\nSolution:
\nThe solar radiation which is absorbed by the car is the basis for the green house effect.
\nQuestion-81<\/span><\/strong>
\nWhat is solar constant?
\nSolution:
\nThe Solar Radiation that falls on an area above the atmosphere at a vertical angle: s = 1.37 kW \/ m\u00b2.
\nIn space, solar radiation is practically constant; on earth it varies with the time of day and year as well as with the latitude and weather. The maximum value on earth is between 0.8 and 1.0 kW \/ m\u00b2. In Germany, the average annual amount of insolation varies between 950 and 1100 kWh \/ m\u00b2, depending on the region.<\/p>\n

Question-82<\/span><\/strong>
\nWhat radiations are converted to electricity in a solar cell? What are they used?
\nSolution:
\nSolar radiations are converted into electricity in solar cell which is used in traffic signal lights, etc.<\/p>\n

Question-83<\/span><\/strong>
\nName any two renewable sources of energy.
\nSolution:
\nSolar energy and wind energy.<\/p>\n

Question-84<\/span><\/strong>
\nExplain about calorific value of fuel.
\nSolution:
\nHeat energy is measured in units of joules or calories (1 calorie = 4.18 joules). The heat generated by fuels when they burn in joules or calories measures quality of fuels. All fuels do not burn efficiently. Thus there are fuels that produce more heat than the others are. This can be distinguished in terms of number of joules or calories that they generate on burning.<\/p>\n

Question-85<\/span><\/strong>
\nDefine ignition temp. Which has lower ignition temperature, kerosene or LPG. Why?
\nSolution:
\nWhen any substance tends to burn for a particular temperature it is called the ignition temperature for that particular substance.<\/p>\n

Question-86<\/span><\/strong>
\nExplain about solar collector.
\nSolution:
\nSolar collector is a form of collector which collects solar energy and transforms the solar energy to the form which can be utilized according to the system.
\nQuestion-87<\/span><\/strong>
\nWhat are the characteristics of source of energy?
\nSolution:
\nCharacteristics are generally classified in to renewable sources of energy and non-renewable sources of energy, which is used in heating, producing power, etc.<\/p>\n

Question-88<\/span><\/strong>
\nHow is electricity produced from thermal power plants?
\nSolution:
\nIn thermal power plants, heat is converted into steam energy which runs the turbine to get electrical energy.<\/p>\n

Question-89<\/span><\/strong>
\nGive the peculiar property of glass sheet?
\nSolution:
\nA glass sheet transmits solar radiation into it as a semiconductor.<\/p>\n

Question-90<\/span><\/strong>
\nWhat are the important factors\/parts in constructing a solar cooker? Give its importance.
\nSolution:
\nBlack coated sheets, glass plates, vessel, etc.<\/p>\n

Question-91<\/span><\/strong>
\nGive one main difference between solar cooker and solar concentrator.
\nSolution:
\nIn solar cooker, solar radiation spreads at all the points, whereas in solar concentrator it is concentrated at a particular point.<\/p>\n

Question-92<\/span><\/strong>
\nExplain the construction of a solar cell. Give the uses of solar cell.
\nSolution:
\nSolar cell consists of a black plate, which absorbs the solar radiation and converts this solar radiation in to electrical energy by the process of photoelectric effect. It is used in traffic signals, etc.<\/p>\n

Question-93<\/span><\/strong>
\nHow is harnessing hydroelectric energy done on a small scale?
\nSolution:
\nBy using the flow of water in rivers and dams, hydroelectricity is demonstrated and power is generated.<\/p>\n

Question-94<\/span><\/strong>
\nExplain about hydroelectricity.
\nSolution:
\nIt is the conversion of flow of water in to electric power. The basic process is electromagnetic induction, which converts mechanical energy into electrical energy.<\/p>\n

Question-95<\/span><\/strong>
\nHow is biogas energy better than any energy?
\nSolution:
\nBiogas energy is better than any other energy, because it is not harmful at any cause and it is pollution free.<\/p>\n

Question-96<\/span><\/strong>
\nWhy are hydrogen and alcohol not commercial fuel?
\nSolution:
\nWhen alcohol is used as a fuel, then the byproduct is carbon dioxide and carbon monoxide. This is the reason that hydrogen and alcohol are not commercial fuel.<\/p>\n

Question-97<\/span><\/strong>
\nExplain wind energy.
\nSolution:
\nWind energy is the conversion of air pressure into electric power. The high pressure wind runs the wind mill, which in turn produces electric power.<\/p>\n

Question-98<\/span><\/strong>
\nWhat are the qualities in choosing a good fuel?
\nSolution:
\nMust be highly efficient, low in cost and durable.<\/p>\n

Question-99<\/span><\/strong>
\nWhat are the limitations of harnessing wind energy? Where is the largest wind energy farm in India?
\nSolution:
\nWindmill gives high efficiency only in wind seasons. Wind energy is the conversion of air pressure into electric power. The high-pressure wind runs the windmill, which in turn produces electric power. We have the wind mills in northern part of our country which produces high power.<\/p>\n

Question-100<\/span><\/strong>
\nDraw a neat diagram of the box type solar cooker. Label it and explain the function of each part.
\nSolution:
\nA solar cooker is like a hot box, in which we can cook our food without any cooking gas or kerosene, electricity, coal or wood. We do not need to spend even a single paisa on fuel. This cooker works with the solar energy, which is available free. In a solar cooker we can boil, bake and roast, and in a cooker for domestic use, we can cook food for four to five persons. Bigger size solar cookers are also available for cooking food upto 15 persons.
\nInsulating Box<\/strong>
\nA solar cooker consists of a well-insulated box for storing energy. To increase the absorption of solar radiation, the inside of the box is painted back.
\nGlass Lid<\/strong>
\nThe insulated box has a glazing glass surface for collecting energy. The solar cooker absorbs the Sun\u2019s radiant energy through this glass lid.
\nReflector<\/strong>
\nThe insulated box has a reflector, which is an ordinary mirror used to reflect sunlight into the box. This reflector helps to track the movement of the sun, focusing sunlight and therefore concentrating the heat energy inside the box.
\nBlack Pots<\/strong>
\nSolar absorption is also increased by using dark-coloured pots for cooking. The vessels that are painted in black are placed inside the box with the food to be cooked.<\/p>\n

Question-101<\/span><\/strong>
\nWhy is the sun very hot than any other hot body and how does it continuously emit solar energy? Justify.
\nSolution:
\nDue to nuclear fusion, there is a continuous emission of solar energy.<\/p>\n

Question-102<\/span><\/strong>
\nGive the purpose of mirror and glass sheet in solar cooker.
\nSolution:
\nIn solar cooker glass sheet acts as a transparent medium which allows light into the medium. Mirror reflects the light which emerges from the cooker.
\nQuestion-103<\/span><\/strong>
\nWhy are solar cells not used effectively?
\nSolution:
\nHigh expensive, not re-usable. Hence it is not used effectively.<\/p>\n

Question-104<\/span><\/strong>
\nGive the limitations in using commercially wood as fuel, over windmills.
\nSolution:
\nBasic commercial fuel used is wood, because of its abundance in existence. Another fact is it is non-renewable but windmill energy is a renewable source of energy.
\nQuestion-105<\/span><\/strong>
\nA student constructed a box type solar cooker. He found that it is not working efficiently. What could this be due to? Give any four possible mistakes that he could have made?
\nSolution:
\nThe transparency of the glass plate must be checked.
\nThe reflectance of the mirror is to be checked.
\nThe black coating must be coated effectively.
\nThe solar cooker must be placed in a way such that it faces the sun\u2019s radiation.<\/p>\n

Question-106<\/span><\/strong>
\nWhat are the advantages of using solar water heater? Draw a labeled schematic diagram for a solar water heater.
\nSolution:
\nA Solar Water Heater (SWH) is a device that uses solar energy to heat water. Solar Water Heater have several advantages over conventional water heating systems. For consumers, they save electrical energy, save interior space (because they are usually located on rooftops,) and eliminate the risk of accidents in bathrooms due to electrical water heating equipment, They require little or no care and attention while providing hot water for about 300 days in a year in most parts of India. For society at large, they reduce the need for fossil fuels for electrical generation and for fuels such as firewood, coal, furnace oil, etc, that are used in domestic, commercial and industrial boilers. Thereby, they also reduce degradation of the environment
\nSolar water heater
\nQuestion-107<\/span><\/strong>
\nDefine solar constant.
\nSolution:
\nThe amount of solar energy form the sun which incident on the earth per square metre is called solar constant.
\nQuestion-108<\/span><\/strong>
\nWhat is the main basic cause for winds to blow? Compare wind power and power of water flow in respect of generating mechanical and electrical energies.
\nSolution:
\nThe main basic cause for the winds to blow is the difference in temperature of the atmosphere, which makes the air to get high dense and low dense and in turn flow from one part to other. When comparing wind power and hydroelectricity, it seems that hydroelectricity is better when compared with wind energy.
\nQuestion-109<\/span><\/strong>
\nWrite two limitations of wind mill.
\nSolution:
\nAn estimated 1% to 3% of energy from the Sun that hits the earth is converted into wind energy. This is about 50 to 100 times more energy than is converted into biomass by all the plants on Earth through photosynthesis. Most of this wind energy can be found at high altitudes where continuous wind speeds of over 160 km\/h (100 mph) occur. Eventually, the wind energy is converted through friction into diffuse heat throughout the Earth\u2019s surface and atmosphere.<\/p>\n

The origin of wind is simple. The Earth is unevenly heated by the sun resulting in the poles receiving less energy from the sun than the equator does. Also the dry land heats up (and cools down) more quickly than the seas do. The differential heating powers a global atmospheric convection system reaching from the Earth\u2019s surface to the stratosphere which acts as a virtual ceiling.
\nQuestion-110<\/span><\/strong>
\nExplain wind power, the principle behind wind mill and its uses.
\nSolution:
\nWind power is the conversion of wind energy into more useful forms, usually electricity using wind turbines. In 2005, worldwide capacity of wind-powered generators was 58,982 megawatts; although it currently produces less than 1% of world-wide electricity use, it accounts for approximately 25% of electricity use in Denmark, 9% in Spain, and 6% in Germany. Globally, wind power generation more than quadrupled between 1999 and 2005.<\/p>\n

Most modern wind power is generated in the form of electricity by converting the rotation of turbine blades into electrical current by means of an electrical generator. In windmills (a much older technology) wind energy is used to turn mechanical machinery to do physical work, like crushing grain or pumping water.<\/p>\n

Wind power is used in large scale wind farms for national electrical grids as well as in small individual turbines for providing electricity to rural residences or grid-isolated locations. Wind energy is ample, renewable, widely distributed, clean, and mitigates the greenhouse effect if used to replace fossil-fuel-derived electricity.<\/p>\n

Question-111<\/span><\/strong>
\n(a) What is a solar water heater?
\n(b) Mention one advantage and one disadvantage of harnessing solar energy.
\nSolution:
\n(a) A Solar Water Heater (SWH) is a device that uses solar energy to heat water.
\n(b) Solar Water Heater have several advantages over conventional water heating systems. For consumers, they save electrical energy, save interior space (because they are usually located on rooftops) and eliminate the risk of accidents in bathrooms due to electrical water heating equipment, They require little or no care and attention while providing hot water for about 300 days in a year in most parts of India. For society at large, they reduce the need for fossil fuels for electrical generation and for fuels such as firewood, coal, furnace oil, etc, that are used in domestic, commercial and industrial boilers. Thereby, they also reduce degradation of the environment.<\/p>\n

Question-112<\/span><\/strong>
\nDraw the two common designs of solar cookers.
\nSolution:
\nBox type solar heater and Spherical type solar heater<\/p>\n

Question-113<\/span><\/strong>
\nWhat is the meaning for gobar?
\nSolution:
\nGobar means animal dung in Hindi.<\/p>\n","protected":false},"excerpt":{"rendered":"

Question-1 Explain why only a part of the solar energy that strikes the upper regions of atmosphere, reaches the surface […]<\/p>\n","protected":false},"author":7,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_yoast_wpseo_focuskw":"","_yoast_wpseo_title":"Class 10 Science Extra Questions of Sources of Energy","_yoast_wpseo_metadesc":"Extra Questions for Class 10th: Ch 14 Sources of Energy (Science) Important Questions","custom_permalink":"study-materials\/extra-questions\/sources-of-energy\/cbse-class-10-science\/"},"categories":[92,93,21,1],"tags":[],"table_tags":[],"acf":[],"yoast_head":"\nClass 10 Science Extra Questions of Sources of Energy<\/title>\n<meta name=\"description\" content=\"Extra Questions for Class 10th: Ch 14 Sources of Energy (Science) Important Questions\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/infinitylearn.com\/surge\/study-materials\/extra-questions\/sources-of-energy\/cbse-class-10-science\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Class 10 Science Extra Questions of Sources of Energy\" \/>\n<meta property=\"og:description\" content=\"Extra Questions for Class 10th: Ch 14 Sources of Energy (Science) Important Questions\" \/>\n<meta property=\"og:url\" content=\"https:\/\/infinitylearn.com\/surge\/study-materials\/extra-questions\/sources-of-energy\/cbse-class-10-science\/\" \/>\n<meta property=\"og:site_name\" content=\"Infinity Learn by Sri Chaitanya\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/InfinityLearn.SriChaitanya\/\" \/>\n<meta property=\"article:published_time\" content=\"2022-01-17T13:53:37+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2025-05-28T10:51:28+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/infinitylearn.com\/surge\/wp-content\/uploads\/2025\/04\/infinitylearn.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1920\" \/>\n\t<meta property=\"og:image:height\" content=\"1008\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@InfinityLearn_\" \/>\n<meta name=\"twitter:site\" content=\"@InfinityLearn_\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Prasad Gupta\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"32 minutes\" \/>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Class 10 Science Extra Questions of Sources of Energy","description":"Extra Questions for Class 10th: Ch 14 Sources of Energy (Science) Important Questions","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/infinitylearn.com\/surge\/study-materials\/extra-questions\/sources-of-energy\/cbse-class-10-science\/","og_locale":"en_US","og_type":"article","og_title":"Class 10 Science Extra Questions of Sources of Energy","og_description":"Extra Questions for Class 10th: Ch 14 Sources of Energy (Science) Important Questions","og_url":"https:\/\/infinitylearn.com\/surge\/study-materials\/extra-questions\/sources-of-energy\/cbse-class-10-science\/","og_site_name":"Infinity Learn by Sri Chaitanya","article_publisher":"https:\/\/www.facebook.com\/InfinityLearn.SriChaitanya\/","article_published_time":"2022-01-17T13:53:37+00:00","article_modified_time":"2025-05-28T10:51:28+00:00","og_image":[{"width":1920,"height":1008,"url":"https:\/\/infinitylearn.com\/surge\/wp-content\/uploads\/2025\/04\/infinitylearn.jpg","type":"image\/jpeg"}],"twitter_card":"summary_large_image","twitter_creator":"@InfinityLearn_","twitter_site":"@InfinityLearn_","twitter_misc":{"Written by":"Prasad Gupta","Est. reading time":"32 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Organization","@id":"https:\/\/infinitylearn.com\/surge\/#organization","name":"Infinity Learn","url":"https:\/\/infinitylearn.com\/surge\/","sameAs":["https:\/\/www.facebook.com\/InfinityLearn.SriChaitanya\/","https:\/\/www.instagram.com\/infinitylearn_by_srichaitanya\/","https:\/\/www.linkedin.com\/company\/infinity-learn-by-sri-chaitanya\/","https:\/\/www.youtube.com\/c\/InfinityLearnEdu","https:\/\/twitter.com\/InfinityLearn_"],"logo":{"@type":"ImageObject","@id":"https:\/\/infinitylearn.com\/surge\/#logo","inLanguage":"en-US","url":"","contentUrl":"","caption":"Infinity Learn"},"image":{"@id":"https:\/\/infinitylearn.com\/surge\/#logo"}},{"@type":"WebSite","@id":"https:\/\/infinitylearn.com\/surge\/#website","url":"https:\/\/infinitylearn.com\/surge\/","name":"Infinity Learn by Sri Chaitanya","description":"Surge","publisher":{"@id":"https:\/\/infinitylearn.com\/surge\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/infinitylearn.com\/surge\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/infinitylearn.com\/surge\/study-materials\/extra-questions\/sources-of-energy\/cbse-class-10-science\/#webpage","url":"https:\/\/infinitylearn.com\/surge\/study-materials\/extra-questions\/sources-of-energy\/cbse-class-10-science\/","name":"Class 10 Science Extra Questions of Sources of Energy","isPartOf":{"@id":"https:\/\/infinitylearn.com\/surge\/#website"},"datePublished":"2022-01-17T13:53:37+00:00","dateModified":"2025-05-28T10:51:28+00:00","description":"Extra Questions for Class 10th: Ch 14 Sources of Energy (Science) Important Questions","breadcrumb":{"@id":"https:\/\/infinitylearn.com\/surge\/study-materials\/extra-questions\/sources-of-energy\/cbse-class-10-science\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/infinitylearn.com\/surge\/study-materials\/extra-questions\/sources-of-energy\/cbse-class-10-science\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/infinitylearn.com\/surge\/study-materials\/extra-questions\/sources-of-energy\/cbse-class-10-science\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/infinitylearn.com\/surge\/"},{"@type":"ListItem","position":2,"name":"Extra Questions \u2013 Sources of Energy \u2013 CBSE Class 10 Science"}]},{"@type":"Article","@id":"https:\/\/infinitylearn.com\/surge\/study-materials\/extra-questions\/sources-of-energy\/cbse-class-10-science\/#article","isPartOf":{"@id":"https:\/\/infinitylearn.com\/surge\/study-materials\/extra-questions\/sources-of-energy\/cbse-class-10-science\/#webpage"},"author":{"@id":"https:\/\/infinitylearn.com\/surge\/#\/schema\/person\/143c89c9c2f5e56ed91f96dde47b0b05"},"headline":"Extra Questions \u2013 Sources of Energy \u2013 CBSE Class 10 Science","datePublished":"2022-01-17T13:53:37+00:00","dateModified":"2025-05-28T10:51:28+00:00","mainEntityOfPage":{"@id":"https:\/\/infinitylearn.com\/surge\/study-materials\/extra-questions\/sources-of-energy\/cbse-class-10-science\/#webpage"},"wordCount":7040,"publisher":{"@id":"https:\/\/infinitylearn.com\/surge\/#organization"},"articleSection":["CBSE Notes","Important Questions","Study Materials"],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/infinitylearn.com\/surge\/#\/schema\/person\/143c89c9c2f5e56ed91f96dde47b0b05","name":"Prasad Gupta","image":{"@type":"ImageObject","@id":"https:\/\/infinitylearn.com\/surge\/#personlogo","inLanguage":"en-US","url":"https:\/\/secure.gravatar.com\/avatar\/200104b443e586c76c46cadc113d931c?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/200104b443e586c76c46cadc113d931c?s=96&d=mm&r=g","caption":"Prasad Gupta"},"url":"https:\/\/infinitylearn.com\/surge\/author\/prasad\/"}]}},"_links":{"self":[{"href":"https:\/\/infinitylearn.com\/surge\/wp-json\/wp\/v2\/posts\/41058"}],"collection":[{"href":"https:\/\/infinitylearn.com\/surge\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/infinitylearn.com\/surge\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/infinitylearn.com\/surge\/wp-json\/wp\/v2\/users\/7"}],"replies":[{"embeddable":true,"href":"https:\/\/infinitylearn.com\/surge\/wp-json\/wp\/v2\/comments?post=41058"}],"version-history":[{"count":0,"href":"https:\/\/infinitylearn.com\/surge\/wp-json\/wp\/v2\/posts\/41058\/revisions"}],"wp:attachment":[{"href":"https:\/\/infinitylearn.com\/surge\/wp-json\/wp\/v2\/media?parent=41058"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/infinitylearn.com\/surge\/wp-json\/wp\/v2\/categories?post=41058"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/infinitylearn.com\/surge\/wp-json\/wp\/v2\/tags?post=41058"},{"taxonomy":"table_tags","embeddable":true,"href":"https:\/\/infinitylearn.com\/surge\/wp-json\/wp\/v2\/table_tags?post=41058"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}